Stainless steel Tunnel air shower booth

An air shower is a chamber that blows high pressured air on an individual before worker enters a controlled area. The air is forced at high speed through SS air shower nozzles that are aimed at the individual so that contaminants are knocked off. The air is then cycled through prefilters and then through a high efficiency particulate air (HEPA) filter or an ultra low particulate air (ULTA) filter. The HEPA filter is able to remove 99.99% of particulates up to 0.3 microns in size, and the ULTA filter is able to remove 99.999% of particulates up to 0.12 microns. After being filtered, the air is sent back into the air shower to continue the process.

DSX Stainless steel Tunnel air shower  booth FEATURES：
Modular design lets you order a system to suit your cleanroom
HEPA filter/blower modules (rated 99.97% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles Solid-state
Interlocking doors minimize contamination, release automatically in the event of power failure
microprocessor panel provides programmable control over access door operation
Fluorescent lighting is housed in the ceiling for minimal turbulence
Available in white epoxy-finished CR steel, stainless steel, or plastic laminate to meet various cleanroom requirements
Variety of sizes and door configurations
Economical to operate, easy to maintain
System options include HEPA-filtered ceiling, ionized grid, and safety glazing
These Air Showers and Tunnels offer an effective way to remove surface-deposited particles from personnel—before they get to the cleanroom.

 

 Deshengxin Stainless steel Tunnel air shower  booth Material: 
Outside case: 1.0mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)
Inside case: 1.0mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)
Doors: SUS#201,SUS#304 or aluminum alloy
Base: SUS#201 or 304
Nozzles:SUS

 
DSX  air shower Standar size and specificaton:

Model	Air shower
	DSX-FL-1200	DSX-FL-1400	DSX-FL-1500
External dimensions (mm)	1200x1000x 2150	1400x1000x 2150	1400x1500x 2150
Dimensions in WxDxH(mm)	800x920x 1950	800x920x 1950	800x1400x 1950
Material for case	Cold rolled steel with powder coated , SUS#201 or SUS#304
Suitable person	1	1	2
Nozzles	6(one side)	12(two sides)	18(two sides)
Blow power(W)	1100	2200	2500
HEPA filter’s dimensions	610x610x50 One piece	610x610x69 two piece	610x610x69 two piece
Nozzle diameter	30mm
Air shower time	0~99s Adjustable
Spurt wind speed	25m/s(+-20%)
Voltage	380V/50Hz/3Ph; 220V/50Hz/1Ph
hepa Filter efficiency	Above 99.99% efficient on 0.3um particles
Control system	LCD control panel, electronic interlock and automatic blowing

Customer’s sizes and specifications are welcome.

 

 Air shower,air shower in air shower,air shower clean room,air shower blower, intelligent air shower,air shower room,air shower pass box ,air shower cleanroom, portable air shower,automatic air shower,pass box in air shower,air shower for clean room,intelliqent air shower,small portable air shower, standard air shower, Stainless Steel Clean Room HEPA Filter Air Shower, Manual Air Shower, clean room air shower, Three-Door Air Shower Clean Room,single side air shower, Clean Room Shutter Door Air Shower, Cargo Air Shower with high speed scroll doors